Doepfer A-100 LMB Base Case PSU3

£615.00

Sometimes the originals are still the best. We’re big fans of the sturdy, trouble free industrial Doepfer cases. These new cases with PSU3 also now provide 5V power.

This is the perfect addition to a LC6 or LC9 which stack beautifully on top of this performance base unit.

In stock

SKU: DOEPLMB Category: Brand:

Description

A-100LMB is the low cost version of the A-100PMB. 

Dimensions and weight:
outside dimensions: ~ 87 (length) x 19 (height) x 38 (depth) cm
weight of the case (incl. bus boards, power supplies, without modules): ~ ? kg
available 19″ width and height:
2 x 3U x 168 HP

Quantity of bus boards: 4

Maximum Output Current:
two built-in A-100PSU3 : +12V/4000 mA, -12V/2400mA, +5V/8000mA

Usable depth for modules:
approx. 65 mm in the lower front row
approx. 90 mm in the upper angled row
(measured from inner side of the front panel until end of the pc board of the module)

Position of the mains inlet: center of the rear panel 

All bus boards are located in the rear area (even those for the modules that are mounted in the front row). This was necessary to take advantage of the full height of the front area for installation of modules. The max. depth for modules in the front row is ~ 65 mm.

Additional information

Weight 9.5 kg
Dimensions 50 x 53 x 53 cm