Mög L1 Limiter

£135.00

3 X Limiter, AC or DC coupled

In stock

SKU: DPWDLM1 Categories: , Brand:

Description

The L1 is a three individual soft knee limiter module in Eurorack format. An all analog unit.
It can be used for audio signal manipulation or as a utility module for control voltages. The three channels can be AC or DC coupled.
It can be used for normal limiting/compression but also for creative waveshaping.

The soft knee of the limiter is actually 8 consecutive soft knees for each channel starting at -3dB and spread evenly up to 0dB.
The limiter will brick wall limit to +/- 5V both in AC and DC mode.

For each channel there is a volume control that controls how hard the limiter is driven.
When the knob is at 9 o’clock what passes through is almost unaffected.
Turning the the knob to full will give 5 times amplification drive in to the limiter, giving a rounded distorted sound.

The three channels are completely independent.

AC/DC coupling for Lim1 and Lim2 is done with the switch on the panel.

AC/DC coupling for Lim3 is done by a jumper on the back of the module.
When the jumper is mounted Lim3 is DC coupled.
The module is delivered with the jumper mounted.

If you need more compression than one limiter can do just connect OUT from one limiter to IN on the next.

Specs:
20 mA +12V
20 mA -12V
0 mA 5V
25mm deep

L1 manual

Additional information

Weight 0.2 kg
Dimensions 18 x 5 x 3 cm