Description
The Addac210 is a development platform optimized for the Eurorack electronic enthusiast.
Features:
- ❤On/Off Power switch
- ❤Current consumption 3 led display with short circuit protection shutdown via electro-mechanical relays triggered when above 700mA:
150mA, 400mA, 700mA/OFF - ❤Arduino shield headers in the back, usb cable comes out from the side, all Arduino pins in the front panel!
- ❤Main power connections:
-12V, GND, +12V - ❤Secondary power connections (variable voltage regulators) adjustable via the front panel small trimpots:
-3/10V, +3/10V
Frontpanel parts:
- ❤On/Off Power switch
- ❤1x breadboard
- ❤1x 1K Pots
- ❤2x 10k Pot
- ❤1x 100k Log Pot
- ❤1x 100k Pot
- ❤1x 1M Pot
- ❤4x Leds
- ❤1x Photocell
- ❤2x SPST (normally open) push switches
- ❤1x DPDT (on/on) toggle switch
- ❤1x SPDT (on/on) toggle switch
- ❤2x SPDT (on/off/on) toggle switches
- ❤1x 3.5mm stereo jack
- ❤5x 3.5mm mono jack
- ❤1x 1/4” mono jack
Power sources:
- -12V, +12V
- -3/10V, +3/10V
Ships with:
- 1M Ribbon Cable and 55cm standoff Spacers for desktop operation.
- 1 Extra breadboardScrews and nylon washers
Mechanical Specs:
Width: 36 HP
Depth: 3.5cm (±1.375 inches) with or without Arduino installed, Depth increases if using arduino shields.
700 mA +12V
? mA -12V
? mA 5V
