Intellijel 7U Powered Case

£610.00

84hp of 2x3U and 1x1U. Modules in picture not included.

Out of stock

SKU: INTE7UCS Category: Brand:

Description

Features:

  • Two 84 hp rows (6U) of Eurorack module space.
  • One 84 hp row for our 1U modules.

Construction:

  • Solid plastic carrying handle.
  • Detachable nylon carrying strap.
  • Anodized aluminum lid with latches, deep enough to close the case with cables patched in.
  • Retractable feet that can support the case at two different angles. Or lay the case flat on a table.
  • Plastic feet for resting the case on the table.
  • Rubber feet on bottom side of lid so the case can stand vertically with the lid attached.
  • Spring-loaded latching accessory slots on top and bottom of the case. The slots can be used to attach two cases together and for the carrying strap.
  • Rear panel:
  • Four 1/4″ audio jacks that can be connected to the Audio I/O 1U. Two ins and two outs.
  • MIDI In, Out, and Thru jacks. The In jack can be connected to the µMIDI 1U and will pass to the Thru. The Out is for future expansion.
  • USB port that connects to the µMIDI 1U and other future modules.
  • Rocker switch and barrel plug for power entry.

Max. internal depth for modules: 70 mm
Internal depth for modules above the highest point of the power bus board: 53 mm

Outside dimensions with lid: 312 mm x 165 mm x 445 mm
Outside dimensions without lid: 312 mm x 83 mm x 445 mm
Weight: 3.8 kg with lid, 4.3 kg with lid and power adapter
Power: TPS80 +12 V output at 3 A, -12 V output at 3 A, +5 V output at 1.5 A