The A-180-2 is a simple multi-connector. It has eight inter-connected sockets, so that you can “multiply” any audio or control signal. From the factory the modules come as two four-fold multiples. But they can be modified as an eight-fold multiple (solder bridge on the pcb). Though these modules are very “primitive” they are required very often in patches (e.g. to distribute a clock signal or a control voltage). Within a big A-100 system sufficient multiples should be planned.
2 HP / 10.0 mm
Depth: 10 mm (measured from the rear side of the front panel)
Current: 0 mA