Doepfer A-147-2SE VC Delayed LFO

£125.00

Voltage controlled delayed LFO

Out of stock

SKU: DOEA1472V Categories: , Brand:

Description

Special Edition with a red faceplate and custom knobs.

Combination of a voltage controlled LFO (successor of the A-147), a VCA and a voltage controlled delay unit. All three parts can be used individually but in combination you can (very easily due to normalizations) fade in the LFO after having received a gate, e.g. for a delayed tremolo or delayed vibrato.

DETAILS
The LFO has four wave forms (sine, triangle, square and sawtooth), it’s frequency can be voltage controlled and the LFO has a reset input.

Voltage level ranges: -4V to +4V for triangle, sine and square and 0-8V for sawtooth. Frequency range without CV influence: 0.0005Hz to ~200Hz

The VCA has a linear curve and can be used as a voltage controlled attenuator or as a voltage controlled polarizer.

The delay has to be considered an attack-only envelope with a linear characteristic which is fired when receiving a gate at the “delay reset” input. The delay time (or the attack time to be precise) can be controlled manually or with a voltage.

And now to the combined use: The LFO’s triangle output is normalized to the VCA’s signal input. the “delay” envelope output is normalized to the CV input if the VCA. If now the delay receives a gate the attack envelope is fired, the rising voltage slowly opens the VCA and thus the LFO’s amplitude is rising. Voilá, we have a delayed LFO which we can use for tremolos when connected to another VCA or for vibrato when connected to VCO pitch or for whatever you like.

CONNECTORS
LFO: frequency CV input; waveform outputs for sine, triangle, square, sawtooth.
VCA: signal input, signal output, CV input
Delay: reset input, delay time CV input, delay output

SPECS
20mA @ +12V
40 mA @ -12V
8HP
60mm deep

Additional information

Weight 0.2 kg
Dimensions 18 × 5 × 3 cm