Analogue Systems RS-150 Sequential Switch


Switching up to four input signals to one common output

Available on back-order

SKU: ANALRS150 Category: Brand:


Sequential switch module for switching up to four input signals to one common output. The switching is done manually or by an incoming trigger signal. The reset function allows for shortening the sequence length.

Four different signals, CVs or audio signals can be switched to one output – it is not possible vice-versa as the RS-150 module isn´t bi-directional.

Switching is generally done with a trigger or clock signal at the Clock input but it can be handled manually with the STOP / RUN / STEP switch that has three different modes: 

– STOP: the chosen input will be held. Incoming triggers will be ignored

– RUN: the switch reacts to triggers at the clock input and will switch thru the inputs

– STEP: switching is done manually by flipping the switch to “step”-position

The reset function allows for setting the switch back to step 1. This can be done at any given time by a trigger signal at the reset jack or automatized by the reset switch that will shorten the maximal sequence length between 2, 3 or 4 steps.

Technical details
Width: 6HP

Signal inputs 1-4
Signal output
Reset input
Clock input

Additional information

Weight 0.175 kg
Dimensions 15.7 × 10.4 × 10 cm